Hellion HAM 16.150DSP
Hellion Ham 16.150 has:
16 processor channels
12 gain
12 high level inputs
channels operate in bridge at 4 ohms
main work in 2nd and 4th
has built-in bluetooth
8 line inputs
4 linear outputs
optical input
The main difference between the new models Hellion HAM 16.150DSP and Hellion HAM 8.100DSP from existing processor models with a built-in Hellion amplifier is that not all processor channels are “pass-through”; not all channels can be used to connect additional external amplifiers, but a limited number the number of outputs that do not have built-in amplifiers.
The flexibility of connection options is virtually unlimited. The number of additional processor outputs is as many as four, which gives a lot of opportunities for connecting external additional amplifiers of any power you need.
If we add to this the new models’ ability to bridge the channels of built-in amplifiers, we get virtually unlimited possibilities for multi-channel systems with very wide power parameters!
Waterproof: IP54
Hellion HAM 12.80 DSP
Characteristics:
- Number of processor channels: 12
- Number of processor channels: 12
- Output power RMS: 8x50W + 4x100W/4Ohm, 8x80W + 4x150V/2Ohm
- High level inputs: 10
- Processor: Cirrus Logic, 2 cores, 32 bits, 12 channels
- Input voltage for VU inputs: 14V
- Digital, independent inputs: optical TosLink, coaxial, USB-audio
- Bluetooth audio module: 5.0, HD-audio, HI-RES audio
- Additional independent input: RCA, 2 channels
- Built-in amplifier class:8 AB class + wideband 4 D class
- LxWxH: 232x217x42 mm
- Weight: 3000 g
- Waterproof: IP54
Hellion HAM 8.100DSP
Hellion Ham 8.100 has:
10 processor channels
8 gain
8 high level inputs
channels operate in bridged mode at 4 ohms
main work in 2nd and 4th
has built-in Bluetooth
there is also automatic tuning using the Hellion MС-1 microphone
The main difference between the new Hellion HAM 8.100DSP and Hellion HAM 16.150DSP models from existing processor models with a built-in Hellion amplifier is that not all processor channels are “pass-through”; not all channels can be used to connect additional external amplifiers, but a limited number the number of outputs that do not have built-in amplifiers.
The flexibility of connection options is virtually unlimited. The number of additional processor outputs is as many as four, which gives a lot of opportunities for connecting external additional amplifiers of any power you need.
If we add to this the ability of new models to bridge the channels of built-in amplifiers, then we get virtually unlimited possibilities for multi-channel systems with very wide power parameters!
Waterproof: IP54
Hellion HAM 8.80 DSP
Characteristics:
- Number of processor channels: 10
- Number of amplifier channels: 8
- Output power RMS: 8x60W/4Ohm, 8x110W/2Ohm
- High level inputs: 8
- Processor: Cirrus Logic CS47048C, 32 bit + Asahi Kasei AK4619 24 bit
- Input voltage for VU inputs: 1 to 6 — 14V, 7 and 8 — 28V
- Digital, independent inputs: optical TosLink, USB-audio
- Bluetooth audio module: 5.0, HD-audio, HI-RES audio
- Additional independent input: RCA, 2 channels
- Built-in amplifier class: wideband class D TPA3116
- LxWxH: 195x106x43 mm
- Weight: 1500 g
- Waterproof: IP54
Hellion HAM 6.80 DSP
Characteristics:
- Number of processor channels: 8
- Number of amplifier channels: 6
- Output power RMS: 6x60W/4Ohm, 6x110W/2Ohm
- High level inputs: 6
- Processor: Cirrus Logic CS47048C, 32 bit
- Input voltage for VU inputs: 1 to 4 — 14V, 5 and 6 — 28V
- Digital, independent inputs: optical TosLink, USB-audio
- Bluetooth audio module: 5.0, HD-audio, HI-RES audio
- Additional independent input: RCA, 2 channels
- Built-in amplifier class: wideband class D TPA3116
- LxWxH: 185x106x43 mm
- Weight: 1300 g
- Waterproof: IP54
Hellion HAM 4.8Pin DSP
- Output power RMS 680Watt@4Ohm Auxiliary power connected 680Watt@2Ohm
- Output power RMS 625Watt@4Ohm Auxiliary power not connected 625Watt@4Ohm
- 640Watt@2Ω 650Watt@1Ohm
- Frequency range 20Hz~20kHz
- DSP Processor 32-Bit, Cirrus Logic
- Signal converter ADC THD+N -98dB, AKM 32Bit 102dB DR, Cirrus Logic
- Signal converter DAC THD+N -98dB, AKM 32Bit 105dB DR, Cirrus Logic
- Bluetooth Dual stream BT5.1
- USB Music Playback Lossless format mp3, wma, aac FLAC, APE
- Waterproof: IP54
Hellion HAM 1000.1SQ
Characteristics:
- Number of amplifier channels: 1
- Built-in amplifier class: wideband class
- Output power RMS: 1×400 W/4 Ohm, 1×650 W/2 Ohm, 1×1000 W/1 Ohm
- Paired bridge mode «Master/Slave»: yes
- Output power RMS bridge: 1×1200 W/4 Ohm, 1×1600 W/2 Ohm
- Allowable load resistance: 1-8 ohms, 2-8 ohms (bridged mode)
- High Pass Filter: 20 – 20000 Hz, 12 dB/oct.
- Low Pass Filter: 35 – 20000 Hz, 12 dB/oct.
- Subsonic Filter: 15 Hz – 50 Hz 12 dB/oct.
- Let’s solve disabling «Direct» filters: yes
- Phase adjustment: smooth 0-180
- High level inputs: 2
- Input voltage for VU inputs: up to 32 V
- Remote level control: option
- LxWxH: 195x107x43 mm
- Waterproof: IP54
Hellion HAM 2.800D
Characteristics:
- Number of amplifier channels: 2
- Built-in amplifier class: wideband class D
- Output power RMS: 2x170W/4 Ohm, 1x340W/2 Ohm, 1x760W/1 Ohm
- Output power RMS bridge: 1x680W/4 Ohm, 1x1350W/2 Ohm
- High level inputs: 2
- Input voltage for VU inputs: up to 14 V
- High Pass Filter: 20 – 20000 Hz, 12 dB/oct.
- Low Pass Filter: 35 – 20000 Hz, 12 dB/oct.
- Remote level control: included
- LxWxH: 190x84x36 mm
- Waterproof: IP54
Hellion HAM 450.1D
Characteristics:
- Number of amplifier channels: 1
- Output power RMS: 1x165W/4 Ohm, 1x300W/2 Ohm, 1x550W/1 Ohm
- High Pass Filter: 20 – 20000 Hz, 12 dB/oct.
- Low Pass Filter: 35 – 20000 Hz, 12 dB/oct.
- High level inputs: 2
- Input voltage for VU inputs: up to 14 V
- Built-in amplifier class: wideband class D
- Remote level control: included
- LxWxH: 160x84x36 mm
- Waterproof: IP54
Hellion DHL-6
Hellion DHL-6 high-level signal converter with built-in 6-channel processor, Bluetooth module and USB audio.
Functional:
- 4 high-level inputs, with sensitivity switch up to 20 or 36 Volts and EPS load emulation (“fake”) for standard systems.
- 6 processor channels with independent adjustments in each channel. Active adjustable filters, equalizer, delays.
- USB audio with support for MP3 and FLAC formats and the ability to switch tracks via a smartphone application
- Built-in independent Bluetooth audio input
- Ability to control the processor via an application from a smartphone
- Independent AUX line input
- Independent digital optical input
- Automatic switching on when there is a signal at the input
- Remote Out — to turn on amplifiers
Characteristics:
- High level inputs: 4
- Number of processor channels: 6
- Digital, independent inputs: optical TosLink, USB-audio
- Input voltage for VU inputs: 20V, 36V
- Additional independent input: RCA, 2 channels
- Bluetooth audio module: built-in
- USB player: built-in
- EPS load emulator: built-in
- Waterproof: IP54
Hellion HLD — 36
The Hellion HLD-36 is a high-end converter/coupler for the Hellion line of DSP amplifiers.
Pin to pin fits Hellion Ham 6.80dsp model
Waterproof: IP54
Microphone Hellion MC-1
The Hellion HAM 6.80DSP configuration microphone provides new opportunities for independent installation and configuration. You simply connect the optional microphone to a special connector on the case and the system automatically sets all the necessary settings parameters
Hellion Symphony 3.0
Hellion Symphony 3.0 are compact full-range speakers in housings with passive radiators.
Characteristics:
- Aluminum Case
- Rated power: 40W
- Maximum power: 80 W
- Voice coil 4 Ohm, 25 mmSw
- Sensitivity: 90 dB
- Frequency: 150Hz-18kHz
- Magnet type: neodymium
- Magnet No. 38









































































































